Product List
pre grain cleaning machine
- Sieve Air grain cleaning machine with pneumatic table 5XFZ-25 SC
- Machines for cleaning and sorting of grains 5 XFS-5C
- Machines for cleaning and sorting of grains 5 XFS-7.5C
- Machines for cleaning and sorting of grains 5 XFS-10C
- Machines for cleaning and sorting of grains 5 XFS-5CS
- Machines for cleaning and sorting of grains 5 XFS-7.5CS
- Machines for cleaning and sorting of grains 5 XFS-10CS
- Sieve Air grain cleaning machine with double separation (5 XFS-7.5FC)
- Зерноочистительная машина с камнеотборником 5XFS-3FA
- Зерноочистительная машина с камнеотборником 5XFS-3FAS
- Stone cleaners QSC-7
- Stone cleaners QSC-10
Design and operation mashiny
The main working bodies of machines are receiving chamber and an air-purifying chast.
Drive working bodies made of V-belt and chain transmissions from elektrodvigatelya.
Be purified grain heap on zernoprovodam enters the filling auger, which distributes material on the width of the machine and feeds on sloped sheet net transporter.
Grain, light and small impurities pass through it, and the big impurities (straw, spikes, and others.) Are derived from the mesh conveyor belt machine. To intensify the screening of grain fractions driven conveyor branch vstryahivaetsya.
Material that has passed through the mesh conveyor is divided into two streams and flows into the suction channel aspiratsii.
Closed air flow in the machine creates a built-in flow fan. The air flow rate is regulated by a throttle valve located in the discharge channel. Light impurities are removed from the machine screw, and refined grain output samotekom.
The composition and performance of izdeliya
Receiving chamber with a loading auger podgruzhenny valve, strainer drum-skelperatorom; Overhead part-flow fan, the suction and delivery pnevmokanalami; precipitating the camera with a screw discharge light primesey.
Drive working bodies carried out the V-belt and chain peredachami.
- Availability skelperatora removes large impurities at the entrance to the car and loosening of the heap before treatment airflow om.
- Effective removal of impurities in the water capacity of the upward air flow eliminates the debris and the risk of fire in the dryer.
- The working parts of the machine can process a pile with baseline above optimal (humidity - up to 25-30%, a contamination - up to 20%) with a corresponding decrease proizvoditelnosti.